Eth Network Service; Additional Functions (Com Port) - IDS uEye series User Manual

8.1.6

ETH Network Service

In this dialog box, you can enable and disable the network service of the GigE uEye camera for
specific network adapters. In addition, network adapters can be assigned a fixed IP address, which
is required for operating the GigE uEye camera.
Figure 56: uEye Camera Manager - ETH network service
· Status
Displays information on the status of the GigE uEye network service and the connected network
adapters.
· Network adapter
§ Click the
network adapter. To enable the network service, click the
Before you can enable or disable a network adapter, you need to select it in the tree structure of
the dialog box.
We recommend disabling the GigE uEye network service for all network adapters that are not
being used for uEye cameras.
§ In the IP Address and IP Subnetmask input boxes, you can assign a static IP address and a
static IP subnet mask to the selected network adapter. DHCP will be disabled automatically.
8.1.7

Additional Functions (COM Port)

The Additional functions dialog box allows installing virtual COM ports for communication through the
serial interface of the GigE uEye HE camera. The following sections show you how to set up and use
the serial interface.
© 2009 IDS Imaging Development Systems GmbH
button to disable the GigE uEye network service for a
8 Applications
button.
57