Introduction; Copyright; Preface; Safety Information - IDS uEye series User Manual

User Manual uEye Cameras V3.32
1

Introduction

1.1

Copyright

© IDS Imaging Development Systems GmbH. All rights reserved.
IDS Imaging Development Systems GmbH hereby grants the purchaser the right to use the
software.
1.2

Preface

IDS Imaging Development Systems GmbH has taken every possible care in preparing this User
Manual. We however assume no liability for the content, completeness or quality of the information
contained therein. The content of this manual is regularly updated and adapted to reflect the current
status of the software. We furthermore do not guarantee that this product will function without errors,
even if the stated specifications are adhered to.
Under no circumstances can we guarantee that a particular objective can be achieved with the
purchase of this product.
Insofar as permitted under statutory regulations, we assume no liability for direct damage, indirect
damage or damages suffered by third parties resulting from the purchase of this product. In no event
shall any liability exceed the purchase price of the product.
Please note that the content of this User Manual is neither part of any previous or existing
agreement, promise, representation or legal relationship, nor an alteration or amendment thereof. All
obligations of IDS Imaging Development Systems GmbH result from the respective contract of sale,
which also includes the complete and exclusively applicable warranty regulations. These contractual
warranty regulations are neither extended nor limited by the information contained in this User
Manual. Should you require further information on this product, or encounter specific problems that
are not discussed in sufficient detail in the User Manual, please contact your local uEye dealer or
system installer.
All rights reserved. This manual may not be reproduced, transmitted or translated to another
language, either as a whole or in parts, without the prior written permission of IDS Imaging
Development Systems GmbH.
Status: March 2009
1.3

Safety Information

The product must be connected, taken into operation and maintained only by appropriately qualified
personnel.
The error-free and safe operation of this product can only be ensured if it is properly transported,
stored, set up and assembled, and operated and maintained with due care.
1.4

Operating Environment

Please comply with the requirements for the proper use of this product. Failure to do so will render
the warranty void.
Do not subject this product to direct sunlight, moisture or shock. The environmental conditions
specified in chapter Specifications are required.
6 © 2009 IDS Imaging Development Systems GmbH