IDS uEye series User Manual page 97

Linear
Negative
Glow1
Glow2
Astro1
Rainbow1
Map1
Cold/Hot
Sepic
Only red
Only green
Only blue
· Convert color to gray
When you are using a GigE uEye HE color camera, you can convert the color images to
monochrome in the camera before applying the LUT curve. This setting is recommended if you
want to use a LUT for false-color representation. The images are transferred in RGB format.
· Output
The diagram shows that part of the LUT curve that is selected in the Channel box. You can drag
and drop each knee point of the curve. To draw a smooth curve for the selected channel, left-click
on a blank space next to the curve.
· Mirror X/Y
These buttons allow mirroring the curve about the X and Y axes.
· Load/Save
Click Save to save the current LUT curve to a text file. With Load, you can load a saved LUT curve
from a file.
· Default
Click this button to reset all parameters to the model-specific defaults.
© 2009 IDS Imaging Development Systems GmbH
Linear LUT curve without effect
Predefined LUT, inverts the image
Predefined LUT, false-color representation of the image
Predefined LUT, false-color representation of the image
Predefined LUT, false-color representation of the image
Predefined LUT, false-color representation of the image
Predefined LUT, false-color representation of the image
Predefined LUT, false-color representation of the image
Predefined LUT, uses sepia toning for coloring the image
Predefined LUT, shows only the red channel of the image
Predefined LUT, shows only the green channel of the
image
Predefined LUT, shows only the blue channel of the
image
8 Applications
97