IDS uEye series User Manual page 63

· USB *)
§ Hub
Indicates which hub and port a USB camera is connected to. In addition, the full path through all
hubs to the USB controller on the computer is displayed.
§ Controller
Indicates the USB controller to which the camera is connected.
· Device
§ Sensor ID *
§ General
o Runtime firmware version **
o Starter firmware version **
o User EEPROM
The first 8 characters of the user area in the EEPROM are displayed (see Camera
Information).
o COM port number **
Number of the virtual COM port stored in the camera's memory (see Serial Interface
(RS232)).
o Camera temperature **
Indicates the camera temperature in degrees Celsius.
o Device statusflags **
Internal camera status flags
o Control status **
Internal camera status flags
§ Hardware **
o Sensor ID **
o Image memory size **
§ Network **
o MAC address
Unique MAC network address of the camera
o Current IP address/Current IP subnetmask
Current IP configuration
o Persistent IP address/Persistent IP subnetmask
IP configuration stored in the camera's memory
o IP range begin/IP range end
IP range assigned by the computer. If the IP address is automatically assigned, the camera
accesses this IP range and attempts to find an available IP address within this range.
o Paired host MAC/Paired host IP
Network data of the paired computer
o Link
Bandwidth of the camera's network connection
· Local network adapter **
§ General **
o Designation
Name of the network adapter
o DHCP disabled/enabled
o Number of known devices
Number of devices connected to the computer
o Number of paired devices
© 2009 IDS Imaging Development Systems GmbH
)
)
)
)
)
)
)
)
)
)
)
)
)
8 Applications
63