Electrial Specifications; Pin Assignment Gige Connector (M12); Pin Assignment I/O Connector - IDS NXT rome Setup Instructions

6 Electrial specifications

·

Pin assignment GigE connector (M12)

·

Pin assignment I/O connector

6.1 Pin assignment GigE connector (M12)
8-pin M12 socket (M12 connector: MMT361A315)
Pin Description
1 MDX0+
2 MDX0-
3 MDX1+
4 MDX1-
5 MDX3+
6 MDX3-
7 MDX2-
8 MDX2+
The M12 connector of the IDS NXT rome complies with the IEC/PAS 61076-2-109 standard.
6.2 Pin assignment I/O connector
12-pin M12 connector (Attend 216A-12MSR)
Pin Signal
1 VBUS
2 VBUS GND
3 Opto IN (0)
4 Opto IN (1)
5 Opto IN (COM)
6 Opto OUT (COM)
7 Opto OUT (1)
8 Opto OUT (2)
9 RS232 (RxD)
10 RS232 (TxD)
11 Opto IN (2)
12 Opto OUT (0)
Shield Shield
You can check the color assignment of the cable on the
The maximum length of the I/O cable is 30 m. The cable must be shielded.
2020-12-08
Designation 1000BASE-
T
BI_DA+
BI_DA-
BI_DB+
BI_DB-
BI_DD+
BI_DD-
BI-DC-
BI_DC+
Description
Power supply: 12-24 V DC +20 %
Reference level (ground) for power supply and RS-232
Trigger input with optocoupler
Input 1 with optocoupler
Reference level for all Opto IN
Reference level for all Opto OUT
Output 1 with optocoupler
Output 2 with optocoupler
Serial interface
Serial interface
Input 2 with optocoupler
Flash output with optocoupler
Shield
Website
IDS NXT: Setup IDS NXT rome
Designation 100BASE-
TX
TX+
TX-
RX+
RX-
-
-
-
-
directly at the specific accessory item.
Fig. 2: M12 socket,
camera rear view
Fig. 3: I/O connector,
camera rear view
11