Video Window And Full Screen Mode - IDS uEye series User Manual

marking the start and end of the playback loop. To select the start position, use the mouse to drag
the position marker to the desired start position in the endless loop and then click the
Then, set the position marker to the desired end position using the same method. Click the
button to complete defining markers.
8.3.5

Video Window and Full Screen Mode

The video window is displayed dynamically. The possible display sizes are determined based on the
capture resolution and the screen resolution.
To enable full screen mode, press the
playback control. To quit this mode, press
Key combinations in full screen mode
b F
+
^
b O
+
z
(left arrow)
x
(right arrow)
k
(spacebar)
© 2009 IDS Imaging Development Systems GmbH
The video is played back at the same aspect ratio that was used for the capture.
Start/stop full screen mode
Quit full screen mode
Open video file
One frame back
One frame forward
Start/stop video playback
b F
+ keys. In this mode, you can use the keyboard for
^ b
or press
8 Applications
F
+ again.
button.
115