Installing The Ueye Drivers - IDS uEye series User Manual

This download contains only the drivers for USB and Gigabit Ethernet cameras. The SDK and
manuals are not included.
· USB Bus Check er
The USB bus checker provides information on the USB interfaces available on your system
(Windows only).
· Camera Hardware Check
The USB hardware check displays information on whether a connected camera is compatible with
the new driver versions (Windows only). To use this feature, a uEye driver has to be installed on
your system.
· LINUX (USB uEye)
This download contains the drivers for the USB uEye cameras for Linux (kernel version 2.6)
· Imaging Software Interfaces
Click this link to download individual software interfaces for using the uEye in conjunction with
image processing libraries, such as MVTec HALCON. Please note that all these files are also
included in the Windows Setup (V 3.30) download (see above).
· Manuals
Click this link to access the camera manuals, the uEye Programming Manual and other manuals
for components and tools online as PDF files.
· RMA Form
This link displays a form for returning goods to IDS.
· Support
Click this link to display IDS support information and additional contact data.
7.2

Installing the uEye Drivers

The files are downloaded in ZIP format. They have to be extracted after the download before you can
start installing. Double-click the executable (uEye_3320.exe) to start the installation. The uEye driver
installation is menu-driven. Please follow the instructions of the setup program.
The setup will prompt you to select a setup type. Please choose one of the following options:
© 2009 IDS Imaging Development Systems GmbH
To operate a camera with USB board revision 2.0 or earlier, you will need the uEye driver
version 2.40. You can download this driver version from our website at http://www.ids-
imaging.com.
For further information, see also USB uEye SE Driver Compatibility.
You need administrator privileges to install the software.
7 Installation
41