IDS uEye series User Manual page 72

User Manual uEye Cameras V3.32
uEye
Initialize
Initialize and stop
Standby
Close
Reset to defaults
Live
Snap
Sync Trigger (Rising Edge)
Sync Trigger (Falling Edge)
Trigger snap
Trigger mode ...
Properties
Auto contrast
Set new AES/AGC AOI
Clear AES/AGC AOI
Auto whitebalance
Set new AWB AOI
Clear AWB AOI
Set new AOI
72
Open camera and show live image
Open camera
The camera changes to standby mode
Close camera
Resets all values set in the demo program to the defaults
Live video on/off
Snapshot from live video
Triggered snapshot (hardware trigger, rising edge)
Triggered snapshot (hardware trigger, falling edge)
Triggered snapshot (software trigger)
Trigger mode on/off; continuous triggered capture
See Camera Properties
Activate automatic brightness control
Define active area for automatic brightness control
Clear active area defined for automatic brightness control
Activate automatic white balance
Define active area for automatic white balance
Clear active area defined for automatic white balance
After calling Set new AOI, you can select the area to be used as
© 2009 IDS Imaging Development Systems GmbH