IDS uEye series User Manual page 109

Test images marked (RAW) are only properly displayed in raw Bayer mode (see Color).
Figure 87: Selecting test images
(here: UI-5480-C)
§ Parameter value
You can adjust the appearance of some of the test images with the Parameter value slider.
· Default
Click this button to reset all parameters to the model-specific defaults.
© 2009 IDS Imaging Development Systems GmbH
Animated test images are ideal for testing recorded sequences.
With some sensors, the sensor gain setting has an influence on the test image.
For USB cameras, you can use a white test image to check the camera's maximum load
on the USB bus. Due to the transmission process, completely white camera images
require a somewhat more bandwidth on the USB bus than completely black images.
8 Applications
109