IDS uEye series User Manual page 107

Sets the adjustment speed. The higher the speed control is set, the faster the adjustment.
Setting the speed control to 0 disables the adjustment functionality.
· Histogram area
With the histogram settings you define the image area you want to use for determining the average
grayscale value. The following parameters are available:
§ Width
§ Height
§ Left
§ Top
By default the histogram area always equals the size of the current image. If you change the
size of the current image, the image area for determining the grayscale value is automatically
adapted to the new image size.
§ Show
Select this check box to display the defined histogram area as an overlay. The currently
calculated RGB values are also indicated.
· Default
Click this button to reset all parameters to the model-specific defaults.
© 2009 IDS Imaging Development Systems GmbH
8 Applications
107