(2) Press "UP" or "DOWN" button on the front panel to move cursor to the
CHANNEL MODE line at the SPOT MONITOR setup menu. Then press
"LEFT" or "RIGHT" button to select the display mode for spot monitor:
HEXA, FULL, QUAD, NINE. Press "UP" or "DOWN" button on the
front panel to move cursor to the ROTATION TIME line. When set
CHANNEL MODE to the display mode except HEXA, the ROTATION
TIME can be set from 1 second to 10 seconds. When set it to OFF, it is
unchangeable display and no channel rotation for spot monitor.
(3) Press "ENTER" button on the front panel to return back to SYSTEM
setup menu.
12. VGA
Press "UP" or "DOWN" button on the front panel to move the cursor to the
VGA line and press "LEFT", "RIGHT" button to select VGA display mode:
800x600, 1024x768 or 1280x1024.