Installation Process; Ⅱ Operation - Inesun INS-24DVR02 User Manual

function.
19. : Press this button to move the cursor down to the next line in the setup
menu. After pressing "MODE" button, press this button to select next camera
displaying on the screen. In PTZ operation mode, press this button to move
the cursor down to select function.

1.6 Installation Process

1. Remove the power cord of DVR adaptor.
2. Remove the screws of the cover and open the top cover of the DVR. Screw and
take out the HDD bracket and mount HDD to the bracket with the screws.
Mount the bracket with HDD to DVR with the screws. Connect power cord
and SATA cable between HDD and DVR main board. Then mount the top
cover of DVR with the screws.
3. Connect BNC for CAMERA IN port, MONITOR OUT port and JACK for
AUDIO IN, AUDIO OUT port from the relevant equipments.
4. Connect the power cord of adaptor.
Ⅱ OPERATION