Table of Contents
Advertisement
The MOTION setup menu displayed as below:
1. CAMERA CHANNEL
Press "UP" or "DOWN" button on the front panel to move the cursor to the
CAMERA CHANNEL line at the MOTION setup menu. Press "LEFT",
"RIGHT" button to select the channel to set. Select "ALL" to set all channels.
When selecting "ALL", if one item display "---" it means that this feature item
of each channel is different. When saving the setting, if the item selected "---"
the setting of this item is not changed.
2. MOTION ENABLE
Press "UP" or "DOWN" button on the front panel to move the cursor to the
MOTION ENABLE line at the MOTION setup menu. Press "LEFT" or
"RIGHT" button to turn on or off the motion detection function.
3. SENSITIVITY
Press "UP" or "DOWN" button on the front panel to move the cursor to the
SENSITIVITY line at the MOTION setup menu. Press "LEFT" or "RIGHT"
button to select the motion sensitivity from level 0 (lowest) to level 7 (highest).
4. MOTION AREA
(1) Press "UP" or "DOWN" button on the front panel to move the cursor to
the MOTION AREA line at the MOTION setup menu. Press "ENTER"
button to display the MOTION AREA setup screen.
After setting motion area, if record resolution (CIF, 1/2D1, D1) has
changed it needs to set motion area again for new record resolution.
The MOTION AREA setup screen displayed as below:
Hide quick links:
Advertisement
Table of Contents
