(1)
It will display the system information include system firmware version, HDD
information.
(2)
OVERWRITE
Press "LEFT", "RIGHT" button at the SYSTEM INFO menu to select
overwrite function ON or OFF.
(3)
Press "ENTER" button on the front panel to exit the SYSTEM INFO menu
and return to the SYSTEM setup menu.
4. VIDEO FORMAT
Press "UP" or "DOWN" button on the front panel to move the cursor to the
VIDEO FORMAT line and press "LEFT", "RIGHT" button to set system to
PAL or NTSC.
5. LOG VIEW
Press "UP" or "DOWN" button on the front panel to move the cursor to the
LOG VIEW line and press "ENTER" button to display the SYSTEM LOG
menu. Press "UP" or "DOWN" button at the SYSTEM LOG menu to display
the information of event log. Press "CANCEL" button on the front panel to
exit the SYSTEM LOG menu and return to the SYSTEM setup menu.
6. LOG SET
Press "UP" or "DOWN" button on the front panel to move the cursor to the
LOG SET line and press "ENTER" button to display the LOG SET menu.
Press "UP" or "DOWN" button at the LOG SET menu to move the cursor to
MOTION, SENSOR, MANUAL or BOOTING line and press "LEFT" or
"RIGHT" button to turn on or off the log function of each item. Press
"ENTER" or "CANCEL" button on the front panel to exit the SYSTEM LOG
menu and return to the SYSTEM setup menu. If setting the item to ON it will
display the relevant information in LOG VIEW.
7. DISK FORMAT
1. Press "UP" or "DOWN" button on the front panel to move the cursor
to the DISK FORMAT line at the SYSTEM setup menu. Press
"ENTER" button to display the SELECT DISK setup menu.
The SELECT DISK setup menu displayed as below: