Ptz Menu/Matrix Function - Inesun INS-24DVR02 User Manual

e. At the PTZ SET menu, click on the CAMPOWER button to turn on the
camera power. Click on the CAMPOWER button again to turn off the
camera power. If it supports menu or matrix operation for the PTZ
protocol, this button is MENU button for PTZ and click on it to enter
PTZ MENU/ MATRIX setup menu.

2.13.4 PTZ Menu/Matrix Function

1. At the PTZ SET menu, press "LEFT", "RIGHT", "UP" or "DOWN" button on
the front panel to move the cursor to the MENU button, press "ENTER"
button on the front panel to display PTZ MENU/MATRIX setup menu and
enter PTZ menu setting mode. If it does not support menu and matrix
operation for the PTZ protocol, this menu can not be opened.
2. At the MENU/MATRIX setup menu, press "LEFT", "RIGHT", "UP" or
"DOWN" button on the front panel to move the cursor to the MONITOR
frame. Press "UP" or "DOWN" button on the front panel to set MONITOR
address to 1 or other number. It is only used for matrix operation if it supports
PTZ matrix protocol.
3. MENU
a. At the MENU/MATRIX setup menu, press "LEFT", "RIGHT", "UP" or
"DOWN" button on the front panel to move the cursor to the MENU
button. Press "ENTER" button on the front panel to enable PTZ menu
setting. Press "ENTER" button again on the front panel to disable PTZ
menu setting.
b. At the MENU/MATRIX setup menu, if PTZ menu function is enabled,
press "LEFT", "RIGHT", "UP" or "DOWN" button on the front panel to
move the cursor to the MENU UP, M DOWN, M LEFT or M RIGHT
button. Press "ENTER" button on the front panel to move the cursor to
up, down, left or right direction at the PTZ menu.
c. At the MENU/MATRIX setup menu, if PTZ menu function is enabled,
press "LEFT", "RIGHT", "UP" or "DOWN" button on the front panel to