Ptz Preset Function - Inesun INS-24DVR02 User Manual

"ZOOM MINUS" and "ZOOM PLUS" icon to control zoom near and far
function. Click or keep pressing the mouse left button on "FOCUS MINUS"
and "FOCUS PLUS" icon to control focus near and far function. Click or keep
pressing the mouse left button on "IRIS MINUS" and "IRIS PLUS" icon to
control iris close and open function.
4. At the PTZ control menu, click on AUTO PAN button to enable PTZ AUTO
control function and word "AUTO PAN" will become yellow color. Click on
AUTO PAN button again to exit PTZ AUTO control function and word
"AUTO PAN" will become white color.
5. Move the cursor to SPEED frame, turn the middle button of mouse to set the
pan/tilt speed from 1 to 8.
6. At the PTZ control menu, click on PRESET button to display PTZ PRESET
menu and enter PTZ preset function setting.
7. At the PTZ control menu, click on SET button to display PTZ SET menu and
enter PTZ other functions setting.
8. If PTZ protocol supports position function, it will display word "SIT" on the
round icon among pan/tilt arrows. At the PTZ control menu, click on SIT icon
to operate PTZ position function.
9. At the PTZ control menu, click on CANCEL button or right click to exit the
PTZ operation mode.
10. At the PTZ control menu, Move the cursor to any place of menu except SPEED
frame and turn the middle button of mouse to make the PTZ menu
transparent.

2.13.2 PTZ Preset Function

1. In PTZ operation mode, press "LEFT", "RIGHT", "UP" or "DOWN" button on
the front panel to move the cursor to the PRESET button at the menu, press
"ENTER" button on the front panel to display PTZ PRESET menu and enter
PTZ preset function setting mode.
2. PRESET