Alarm Time; Hdd Loss; Video Loss; Hdd Full - Inesun INS-24DVR02 User Manual

(1) Press "UP" or "DOWN" button on the front panel to move the cursor to
the BUZZER TIME line at the SENSOR setup menu. Press "LEFT" or
"RIGHT" button to select beep sound time.
(2) The beep sound time can be set from 1 second to 60 second. When setting
it to OFF, the beep does not sound.

5. ALARM TIME

(1) Press "UP" or "DOWN" button on the front panel to move the cursor to
the ALARM TIME line at the SENSOR setup menu. Press "LEFT" or
"RIGHT" button to select post output alarm time.
(2) The post alarm time can be set from 1 second to 60 second. When setting it
to OFF, the alarm does not output.
6.

HDD LOSS

(1) Press "UP" or "DOWN" button on the front panel to move the cursor to
the HDD LOSS line at the SENSOR setup menu. Press "LEFT" or
"RIGHT" button to select HDD loss alarm time.
(2) The beep sound time of HDD loss can be set from 1 second to 30 second.
When HDD is out of action or DVR cannot detect the HDD, the beep of
alarm will sound for the setting duration. When setting it to OFF, the
beep does not sound.
7.

VIDEO LOSS

(1) Press "UP" or "DOWN" button on the front panel to move the cursor to
the VIDEO LOSS line at the SENSOR setup menu. Press "LEFT" or
"RIGHT" button to select video loss alarm time.
(2) The beep sound time of video loss can be set from 1 second to 30 second.
When video of a channel loss, the beep of alarm will sound for the setting
duration and the letter L will be displayed on the channel. When setting it
to OFF, the beep does not sound.
8.

HDD FULL

(1) Press "UP" or "DOWN" button on the front panel to move the cursor to
the HDD FULL line at the SENSOR setup menu. Press "LEFT" or
"RIGHT" button to select HDD full alarm time.
(2) The beep sound time of HDD full can be set from 1 second to 30 second.
When the HDD is full of recording, the beep of alarm will sound for the
setting duration. When setting it to OFF, the beep does not sound.

3.6 SCHEDULE Menu Setup

Press "MENU" button on the front panel to display MAIN MENU during the live
display mode. Press "UP", "DOWN", "LEFT" and "RIGHT" buttons to select
SCHEDULE button in the MAIN MENU and press "ENTER" button to enter
SCHEDULE setup menu. After setting, press "ENTER" button to save the setting.