Manual Recording; Alarm Recording; Schedule Recording - Inesun INS-24DVR02 User Manual

normal image. Double click the mouse to exit ZOOM function.

2.4 Manual Recording

1. Select the channel RECORD MODE to OFF at the RECORD setup menu.
2. Press "REC" button on the front panel or remote controller to begin manual
recording. Or press the "ENTER" button on the front panel to display POPUP MENU
during the live display mode, select the EMG RECORD button to begin manual recording.
The red recording icon will be displayed on the bottom status bar. The letter E will be
displayed on each channel.
3. If the hard disk is full during recording, the system may stop recording when
setting HDD OVERWRITE to OFF at the SYSTEM INFO setup menu. The system may not
stop recording and automatically overwrite the oldest recorded file when setting HDD
OVERWRITE to ON at the SYSTEM INFO menu.
4. Press "REC" button again on the front panel or remote controller to stop manual
recording. Or press the "ENTER" button on the front panel to display POPUP MENU
during the live display mode, select the EMG RECORD button to stop manual recording.
2.5 Alarm Recording ( Sensor and motion recording)
1. Stop manual recording.
2. Connect ALARM IN port of DVR from outside alarm equipments if selecting
SENSOR recording mode.
3. Select the channel RECORD MODE to SENSOR or MOTION at the RECORD
setup menu. Correctly select sensor type and duration at the SENSOR setup menu if
selecting SENSOR recording mode. Correctly select motion setting at the MOTION setup
menu if selecting MOTION recording mode.
4. In the SENSOR recording mode, when a alarm input signal is detected ( the letter
S will be displayed on the channel ), the relevant single screen will begin ALARM recording
and the letter R will be displayed on the channel. In the MOTION recording mode, when
motion detected ( the letter M will be displayed on the channel ), the DVR will begin
ALARM recording and the letter R will be displayed on the channel. If alarm signal cannot
be detected, it will keep ALARM recording for the duration set in the SENSOR or MOTION
setup menu and then stop ALARM recording automatically.
5. Select the channel RECORD MODE to OFF at the RECORD setup menu to
disable ALARM recording.

2.6 Schedule Recording

1. Stop manual recording.
2. Select the channel RECORD MODE to SCHEDULE at the RECORD setup
menu. There are totally 5 schedule recording lists to select.
3. Correctly set the schedule recording date, time and type for a schedule
recording list at the SCHEDULE setup menu.