2. At the SELECT DISK setup menu, Press "LEFT" or "RIGHT" button
on the front panel to select the HDD for formatting. When select ALL
will format all HDD.
3. Press "ENTER" button on the front panel to begin HDD formatting.
8. FIRMWARE UPGRADE
Connect the USB or SATA DVDRW device with the latest firmware. Press
"UP" or "DOWN" button on the front panel to move the cursor to the
FIRMWARE UPGRADE line and press "ENTER" button to display the
WARNING box.
The WARNING box as below:
(1)
Press "ENTER" button on the front panel to begin firmware updating.