Quality; Bitrate; Record Mode - Inesun INS-24DVR02 User Manual

(2) Press "LEFT" or "RIGHT" button on the front panel to move cursor to
the AUTO line at the FRAME RATE setup menu. Then press "MENU"
button to turn on or off auto FPS setting.
(3) When setting AUTO to off at the FRAME RATE setup menu, press
"LEFT" or "RIGHT" button on the front panel to select a channel at the
FRAME RATE setup menu and press "UP" or "DOWN" button to set the
frame rate of the channel. Press "ENTER" button to exit the FRAME
RATE setup menu.
(4) For 24/32 CH DVR, only CIF resolution and this item can not be set.

5. QUALITY

(1) Press "UP" or "DOWN" button on the front panel to move the cursor to
the QUALITY line at the RECORD setup menu. Press "LEFT" or
"RIGHT" button to select the quality of recording image.
(2) The image quality can be selected to HIGHEST, HIGH, STANDARD and
LOW. The higher the image quality set, the bigger the HDD size used.

6. BITRATE

(1) Press "UP" or "DOWN" button on the front panel to move the cursor to
the BITRATE line at the RECORD setup menu. Press "LEFT" or
"RIGHT" button to select the bit rate of recording h264 stream.
(2) The stream bit rate can be selected to HIGHEST, HIGH, STANDARD and
LOW. The higher the bit rate set, the higher recording image quality get,
and the bigger the HDD size used.

7. RECORD MODE

(1) Press "UP" or "DOWN" button on the front panel to move the cursor to
the RECORD MODE line at the RECORD setup menu. Press "LEFT" or
"RIGHT" button to select recording mode.
(2) The recording mode can be selected to ALWAYS, MOTION, SENSOR,
SCHEDULE, OFF. When setting it to OFF, the manual recording mode
can be used .
16CH