Ptz Control; Ptz Operation Function - Inesun INS-24DVR02 User Manual

MENU during the live display mode. Then click on the "SETUP" button to
display MAIN MENU. Then click on the "SYSTEM " button to enter SYSTEM
setup menu.
2. At the SYSTEM setup menu, move the cursor to the SYSTEM INFO line. Click
on the "SET" button to enter SYSTEM INFO menu.

2.13 PTZ Control

2.13.1 PTZ Operation Function

1. Press the desired camera NUMBER button to select the single channel you
wish to display on the monitor or press "LEFT", "RIGHT", "UP","DOWN"
buttons to view one channel video during the live display mode. Then press
"PTZ" button on the front panel to display PTZ control menu and enter the
PTZ operation mode.
For Mini 4CH DVR, press "UP" button or "DOWN" button to select the
single channel you wish to display on the monitor during the live display mode.
Then press the "ENTER" button on the front panel to display POPUP MENU
and select the PTZ line then press "ENTER" button or press "PTZ" button on
the remote controller to display PTZ control menu and enter the PTZ
operation mode.
2. Press "LEFT", "RIGHT", "UP" or "DOWN" button to move the cursor to
"LEFT" or "RIGHT" arrow, press "ENTER" button to control pan function.
Press "LEFT", "RIGHT", "UP" or "DOWN" button to move the cursor to
"UP" or "DOWN" arrow, press "ENTER" button to control tilt function.
Press "LEFT", "RIGHT", "UP" or "DOWN" button to move the cursor to
"LEFT UP" arrow, "LEFT DOWN" arrow, "RIGHT UP" arrow or "RIGHT
DOWN" arrow, press "ENTER" button to operate pan/tilt in relevant
direction.
Note: Only keep pressing "ENTER" button to control pan and tilt function.
When this button released, the system will stop pan and tilt control function.