Table of Contents
Advertisement
(2) Press "UP", "DOWN", "LEFT" or "RIGHT" button on the front panel to
move the cursor to the start point of area, press "ENTER" button to
confirm. Then press "UP", "DOWN", "LEFT" or "RIGHT" button to
move the cursor to get the area marked with relevant color. Press
"ENTER" button again to finish area setting. Press "Menu" button on the
front panel to enter cover area setting menu. Press "UP" or "DOWN"
button to select PREVIEW to view the selected area. Using the same way
to set the cover area 2 and cover area 3. The area that already set before
can not be set again. If needs to set the same area again, must clear the
area first.
(3) Press "UP" or "DOWN" button to select CLEAR AREA 1 at the cover
area setting menu. Press "ENTER" button to clear cover area 1 and the
cleared area will become gray color. Using the same way to clear cover
area 2 and cover area 3.
(4) Press "UP" or "DOWN" button to select EXIT in the cover area setting
menu. Press "ENTER" button to return back to the CAMERA setup
menu. The covered area can not display video for the live, playback and
network viewing.
3.3 RECORD Menu Setup
Press "MENU" button on the front panel to display MAIN MENU during the live
display mode. Press "UP", "DOWN", "LEFT" and "RIGHT" buttons to select
RECORD button in the MAIN MENU and press "ENTER" button to enter
RECORD setup menu. After setting, press "MENU" button to save the setting.
Then exit the submenu and main menu. Press "CANCEL" button to exit submenu
without saving.
The RECORD setup menu displayed as below:
Hide quick links:
Advertisement
Table of Contents
