(1)
Press "UP", "DOWN", "LEFT" or "RIGHT" button on the front panel to
move cursor to select a number, then press "ENTER" button on the front
panel to input this number. Select "←" on the keyboard box to clear the
previous number. After input the correct IP address and move the cursor
to "ENTER" on the keyboard box, press "ENTER" button on the front
panel to exit the keyboard box and return to the NETWORK setup menu.
(2)
Press "CANCEL" button on the front panel to exit the keyboard box and
return to the NETWORK setup menu without saving.
● Mouse
(1)
Click on a number button on the keyboard box to input a number. Click
on "←" button on the keyboard box to clear the previous number. After
input the correct IP address and click on "ENTER" button on the
keyboard box to exit the keyboard box and return to the NETWORK
setup menu.
(2)
Right click the place out of the keyboard box on the screen to exit the
keyboard box and return to the NETWORK setup menu without saving.
4. MAC ADDRESS
Press "UP" or "DOWN" button on the front panel to move the cursor to the
MAC ADDRESS line at the NETWORK setup menu. Press "ENTER" button
to display a keyboard box. Use the same way for setting IP address to set MAC
ADDRESS.
5. NETMASK
Press "UP" or "DOWN" button on the front panel to move the cursor to the
NETMASK line at the NETWORK setup menu. Press "ENTER" button to
display a keyboard box. Use the same way for setting IP address to set
NETMASK.
6. GATEWAY