Summary of Contents for Inesun INS-24DVR02
- Page 1 4/8/16/24/32CH Stand alone digital video recorder User Manual 4/8/16/24/32 CHANNEL H.264 DVR...
-
Page 2: Power Supply
WARNING ● To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. ● All the safety and operating instructions must be read before the unit is operated. PRECAUTION ● Make sure to switch the power off before you install the DVR. ●... - Page 3 FEATURES Non-pc stand-alone security digital video recorder with embedded operation system H.264 compression format Mobile monitoring Multi languages supported Audio and video recording and playback at the same time with D1, half D1 and CIF resolution Support NTSC/PAL video system 4/8/16/24/32CH video inputs, 1CH monitor output, 1CH spot monitor output(for 16/24CH DVR), 2CHx16 spot monitor output(for 32CH DVR) VGA output: 800×600, 1024×768, 1280×1024...
- Page 4 Support zoom function for both live and playback mode. Support live and playback video hide. Support video covered. Support administrator and normal user management. Frame rate in the live display mode：4CH: 120fps(NTSC), 100fps(PAL). 8CH: 240fps(NTSC), 200fps(PAL). 16CH: 480fps(NTSC), 400fps(PAL). 24CH: 720fps(NTSC), 600fps(PAL).
-
Page 5: Table Of Contents
TABLE OF CONTENT Ⅰ INSTALLATION 1.1 Packing Detail 1.2 Front Panel Controls 1.3 Rear Panel Connectors 1.4 Rear Panel Connection 1.5 Remote Controller 1.6 Installation Process Ⅱ OPERATION 2.1 Power On 2.2 Power Off 2.3 Display Mode 2.4 Manual Recording 2.5 Alarm Recording 2.6 Schedule Recording 2.7 Playback... - Page 6 10. PLAYBACK VIDEO HIDE 11.COVER AREA 3.3 RECORD Menu Setup 1. CHANNEL 2. RESOLUTION 3. PRE RECORD 4. FPS 5. QUALITY 6. BITRATE 7. RECORD MODE 8. AUDIO 9. SCHEDULE 10. SYSTEM MAINTENANCE 3.4 MOTION Menu Setup 1. CAMERA CHANNEL 2.
- Page 7 3.8 BACKUP Menu Setup 1. DISK 2. DEVICE 3. CHANNEL 4. START 5. END 6. TOTAL 7. AVI 3.9 SYSTEM Menu Setup 1. TIME SETUP 2. ACCOUNT MANAGER 3. SYSTEM INFO 4. VIDEO FORMAT 5. LOG VIEW 6. LOG SET 7.
-
Page 8: Packing Detail
Ⅰ INSTALLATION 1.1 Packing Detail 1. User’s manual 2. DC12V/2A(4CH), DC12V/3A(8CH) or DC12V/5A(16/24/32CH) power adaptor 3. Screws 1 set 4. Infrared remote controller 1 (Optional for Mini 4CH DVR) 5. USB port mouse 4. CD with mobile software and net viewer software 1.2 Front Panel Controls Mini 4CH DVR 4/8 CH DVR... - Page 9 Mini 16 CH DVR 24 CH DVR 32 CH DVR ● (1) 1. “MENU” button During the live display mode, press this button to display MAIN MENU and enter main setup menu, press “CANCEL” button to exit the main setup menu. After setting parameters in the menu, press “MENU”...
- Page 10 Repeat pressing this button to select the different display mode (9 SPLIT, QUAD, PIP, FULL CHANNEL and 16/25/36 SPLIT). 5. “AUTO” button In the live display mode, press this button to begin auto sequence mode. Each screen displaying will be automatically switching according to the MAIN ROT TIME SETUP.
- Page 11 forward at the speed of 2x, 4x or 6x. 14. “JOG&SHUTTLE” (For 16/32CH DVR) During the playback mode, turn the SHUTTLE ring to the right and left to select speed of FAST FORWARD and REWIND. Turn the JOG dial in either direction continuously for playback of consecutive frames.
-
Page 12: Rear Panel Connectors
playback control mode (PLAY/PAUSE, BACKWARD, FAST FORWARD, STEP FORWORD). ● (3) Power indicator Indicate running state of system. It’s on when system power on. HDD status indicator Flicker when HDD is working. Recording status indicator It will be on when system is recording. Network status indicator It will be on when the system network connection is enabled. - Page 13 8CH DVR 16 CH DVR Mini 16 CH DVR 24 CH DVR...
-
Page 14: Rear Panel Connection
32 CH DVR 1. CAMERA IN (CH1~CH32) 2. AUDIO IN(CH1~CH16) 3. AUDIO OUT 4. LIVE MONITOR OUT 5. VGA OUT 6. RJ-45 ETHERNET 7. RS-485 PTZ AND ALARM INPUT 8. DV12V POWER IN 9. SPOT MONITOR OUT (For 16/24/32 CH DVR) . 10. -
Page 15: Remote Controller
No. 1 ~ No. 16: Alarm signal input. For 32CH DVR there are 1-16 alarm input No. 17: Alarm output: GND (Ground) No. 18: Alarm output: N.C.1 (Normally Closed) No. 19: Alarm output: N.O.1 (Normally Open) No. 20: Alarm output: COM1 (Common) No. - Page 16 : Repeat pressing this button to speed-up playback backward at the speed of X2, X4 or X6 during the playback. In PTZ operation mode, press this button to control tilt up. ┃▏: Press this button to display a still picture during the playback, press this button again to restart play.
-
Page 17: Installation Process
function. : Press this button to move the cursor down to the next line in the setup menu. After pressing “MODE” button, press this button to select next camera displaying on the screen. In PTZ operation mode, press this button to move the cursor down to select function. -
Page 18: Power On
: This icon on the bottom status bar is called the MENU icon in this manual. : This button in the menu is called the SET button in this manual. : This button in the menu is called the CANCEL button in this manual. : This button in the menu is called the OK button in this manual. -
Page 19: Manual Recording
normal image. Double click the mouse to exit ZOOM function. 2.4 Manual Recording 1. Select the channel RECORD MODE to OFF at the RECORD setup menu. 2. Press “REC” button on the front panel or remote controller to begin manual recording. -
Page 20: Playback
4. The system begins or stops schedule recording automatically according to the SCHEDULE setup. 5. Select the channel RECORD MODE to OFF at the RECORD setup menu to disable SCHEDULE recording. 2.7 Playback 1. Press “SEARCH” button on the front panel to display SEARCH MENU during the live display mode. - Page 21 3. During the playback mode, press “ ” button or “ ” button to speed-up playback backward or forward at the speed of 2x, 4x or 6x. For Mini 4CH DVR, press “LEFT” or “RIGHT” button to select “BACKWARD/FORWARD” mode and “ ”...
-
Page 22: Time Searching Playback
ZOOM function. 2.8 Time Searching Playback Press “SEARCH” button on the front panel to display SEARCH MENU during the live display mode. Press “LEFT” or “RIGHT” button to select TIME SEARCH playback mode and press “ENTER” button to enter TIME SEARCH menu. Press “UP”, ”DOWN”, “LEFT”... -
Page 23: Urgent Searching Playback
1. Press “SEARCH” button on the front panel to display SEARCH MENU during the live display mode. 2. Press “LEFT” or “RIGHT” button to select EVENT SEARCH playback mode and press “ENTER” button to enter EVENT SEARCH menu. 3. Press “UP”, ”DOWN”, “LEFT” and “RIGHT” buttons to select the event beginning date/time for playback. -
Page 24: Usb Backup
1. Press “SEARCH” button on the front panel to display SEARCH MENU during the live display mode. 2. Press “LEFT” or “RIGHT” button to select URGENT SEARCH playback mode and press “ENTER” button to enter EMERGENCY SEARCH menu. 3. Press “UP”, ”DOWN”, “LEFT” and “RIGHT” buttons to select the emergency recording date/time for playback. -
Page 25: System Information
press “UP” or “DOWN” button to select backup beginning date/time and end date/time. 4. Press “ENTER” button on the front panel to begin backup. ● Mouse 1. Click the mouse on the MENU icon on the bottom status bar to display POPUP MENU during the live display mode. -
Page 26: Ptz Control
MENU during the live display mode. Then click on the “SETUP” button to display MAIN MENU. Then click on the “SYSTEM ” button to enter SYSTEM setup menu. 2. At the SYSTEM setup menu, move the cursor to the SYSTEM INFO line. Click on the “SET”... - Page 27 Press “LEFT”, “RIGHT”, “UP” or “DOWN” button to move the cursor to “ZOOM MINUS” and “ZOOM PLUS” icon, press “ENTER” button to control zoom near and far function. Press “LEFT”, “RIGHT”, “UP” or “DOWN” button to move the cursor to “FOCUS MINUS” and “FOCUS PLUS”...
-
Page 28: Ptz Preset Function
“ZOOM MINUS” and “ZOOM PLUS” icon to control zoom near and far function. Click or keep pressing the mouse left button on “FOCUS MINUS” and “FOCUS PLUS” icon to control focus near and far function. Click or keep pressing the mouse left button on “IRIS MINUS” and “IRIS PLUS” icon to control iris close and open function. - Page 29 a. At the PTZ PRESET menu, press “LEFT”, “RIGHT”, “UP” or “DOWN” button on the front panel to move the cursor to the PRESET frame. Press “UP” or “DOWN” button on the front panel to set PRESET number to 1. Move the cursor to the SAVE PRE button and press “ENTER”...
- Page 30 button on the front panel to move the cursor to the AUX frame. Press “UP” or “DOWN” button on the front panel to set AUX number to 1 or other number you want to operate. b. At the PTZ PRESET menu, press “LEFT”, “RIGHT”, “UP” or “DOWN” button on the front panel to move the cursor to the AUX ON button.
-
Page 31: Ptz Other Set Function
number you want to delete. Click on the CLR PAT button to delete selected tour. 4. AUX At the PTZ PRESET menu, move the cursor to the AUX frame. Turn the middle button of mouse to set AUX number to 1 or other number you want to operate. - Page 32 c. At the PTZ SET menu, select PATTERN number to 1 or other PATTERN number you wish to run. Press “LEFT”, “RIGHT”, “UP” or “DOWN” button on the front panel to move the cursor to the PATTERN button. Press “ENTER” button to start pattern 1 route operation. Press “ENTER”...
- Page 33 Press “ENTER” button on the front panel to turn on the camera power. Press “ENTER” button again on the front panel to turn off the camera power. If it supports menu or matrix operation for the PTZ protocol, this button is MENU button for PTZ and press “ENTER” button on the front panel to enter PTZ MENU/ MATRIX setup menu.
-
Page 34: Ptz Menu/Matrix Function
At the PTZ SET menu, click on the CAMPOWER button to turn on the camera power. Click on the CAMPOWER button again to turn off the camera power. If it supports menu or matrix operation for the PTZ protocol, this button is MENU button for PTZ and click on it to enter PTZ MENU/ MATRIX setup menu. - Page 35 move the cursor to the M ENTER button. Press “ENTER” button on the front panel to enter PTZ sub menu. Press “ENTER” button again to exit PTZ sub menu. 4. Others At the MENU/MATRIX setup menu, press “LEFT”, “RIGHT”, “UP” or “DOWN”...
-
Page 36: Login
on the light. Click on the LIGHT button again to turn off the light. At the MENU/MATRIX setup menu, click on the MATRIX button to switch matrix. At the MENU/MATRIX setup menu, click on the CAMPOWER button to turn on the camera power. Click on the CAMPOWER button again to turn off the camera power. -
Page 37: Ⅲ System Menu Setup
on the keyboard box to clear the previous input. After input the correct user name, click on ENTER button on the keyboard box to return back to LOGIN MENU. 2. Move the cursor to PASSWORD line. Click on the “SET” button to display a keyboard box. -
Page 38: Main Menu Setup
3.1 Main Menu Setup 1. Press “MENU” button on the front panel to display MAIN MENU during the live display mode. 2. In the MAIN MENU, Press “UP”, ”DOWN”, “LEFT” and “RIGHT” buttons to select submenu button and press “ENTER” button to enter relevant submenu. 3. -
Page 39: Camera Menu Setup
SPLIT (3×3)(For 8/16CH DVR), 25 SPLIT (5×5) (For 24/32CH DVR) and 36 SPLIT (6×6)(For 32CH DVR) SETUP: Enter the system setup mode and display MAIN MENU SEARCH: Enter the playback mode and display the search menu EMG RECORD: Begin and stop manual recording ZOOM: Enter image zoom-in function, only operated by mouse PTZ: Enter PTZ operation mode and display PTZ menu... -
Page 40: Color
Press “UP” or “DOWN” button on the front panel to move the cursor to the CHANNEL line at the CAMERA setup menu. Press “LEFT”, “RIGHT” button to select the channel to set. Select “ALL” to set all channels. When selecting “ALL”, if one item display “---”... -
Page 41: Title
(3) After input the desired camera title, move the cursor to “ENTER” on the keyboard box, press “ENTER” button on the front panel to set the camera title. ● Mouse (1) Click the mouse on the MENU icon on the bottom status bar to display POPUP MENU during the live display mode. -
Page 42: Ptz Baudrate
Channel Address Channe l – Channel 32 1 - 32 6. PTZ BAUDRATE (1) Press “UP” or “DOWN” button on the front panel to move the cursor to the PTZ BAUDRATE line at the CAMERA setup menu. Press “LEFT” or “RIGHT”... -
Page 43: Record Menu Setup
(2) Press “UP”, “DOWN”, “LEFT” or “RIGHT” button on the front panel to move the cursor to the start point of area, press “ENTER” button to confirm. Then press “UP”, “DOWN”, “LEFT” or “RIGHT” button to move the cursor to get the area marked with relevant color. Press “ENTER”... -
Page 44: Channel
1. CHANNEL Press “UP” or “DOWN” button on the front panel to move the cursor to the CHANNEL line at the RECORD setup menu. Press “LEFT”, “RIGHT” button to select the channel to set. Select “ALL” to set all channels. When selecting “ALL”, if one item display “---”... -
Page 45: Quality
16CH (2) Press “LEFT” or “RIGHT” button on the front panel to move cursor to the AUTO line at the FRAME RATE setup menu. Then press “MENU” button to turn on or off auto FPS setting. (3) When setting AUTO to off at the FRAME RATE setup menu, press “LEFT”... -
Page 46: Audio
8. AUDIO (1) Press “UP” or “DOWN” button on the front panel to move the cursor to the AUDIO line at the RECORD setup menu. Press “LEFT” or “RIGHT” button to set audio on or off. (2) When setting AUDIO to ON, the system will record input audio of this channel. -
Page 47: Camera Channel
The MOTION setup menu displayed as below: 1. CAMERA CHANNEL Press “UP” or “DOWN” button on the front panel to move the cursor to the CAMERA CHANNEL line at the MOTION setup menu. Press “LEFT”, “RIGHT” button to select the channel to set. Select “ALL” to set all channels. When selecting “ALL”, if one item display “---”... - Page 48 (2) At the MOTION AREA setup screen, press “MENU” button on the front panel to display a setup menu. Press “UP” or “DOWN” button to move the cursor to the SELECT line and press “ENTER” button to exit the menu and begin setting motion area. (3) Press “UP”, “DOWN”, “LEFT”...
-
Page 49: Post Record Time
(2) At the MOTION AREA setup screen, click the right mouse button to display a setup menu. Move the cursor to the SELECT line and click on it to exit the menu and begin setting motion area. (3) Move the cursor to a starting position of motion area. Keep pressing the left mouse button and drag it to select desired motion area. -
Page 50: Sensor Channel
display mode. Press “UP”, ”DOWN”, “LEFT” and “RIGHT” buttons to select SENSOR button in the MAIN MENU and press “ENTER” button to enter SENSOR setup menu. After setting, press “MENU” button to save the setting. Then exit the submenu and main menu. Press “CANCEL” button to exit submenu without saving. -
Page 51: Alarm Time
(1) Press “UP” or “DOWN” button on the front panel to move the cursor to the BUZZER TIME line at the SENSOR setup menu. Press “LEFT” or “RIGHT” button to select beep sound time. (2) The beep sound time can be set from 1 second to 60 second. When setting it to OFF, the beep does not sound. - Page 52 Then exit the submenu. Press “CANCEL” button to exit submenu without saving. The last line is the comment for recoding mode when selecting ALWAYS, MOTION, SENSOR or CANCEL recording mode. The SCHEDULE setup menu displayed as below: 1. Press NUMBER 1 or “MODE” button on the front panel to select the ALWAYS button at the SCHEDULE setup menu.
-
Page 53: Network Menu Setup
mode is set to SENSOR. 4. Press NUMBER 4 or “BACKUP” button on the front panel to select the CANCEL button at the SCHEDULE setup menu. Or press “UP”, “DOWN”,”LEFT” or “RIGHT” button on the front panel to select the CANCEL button at the SCHEDULE setup menu. -
Page 54: Ip Mode
1. IP MODE Press “UP” or “DOWN” button on the front panel to move the cursor to the IP MODE line at the NETWORK setup menu. Press “LEFT”, “RIGHT” button to select the network IP mode. The IP mode can be set to STATIC, DHCP or PPPoE. -
Page 55: Mac Address
Press “UP”, “DOWN”, “LEFT” or “RIGHT” button on the front panel to move cursor to select a number, then press “ENTER” button on the front panel to input this number. Select “←” on the keyboard box to clear the previous number. After input the correct IP address and move the cursor to “ENTER”... -
Page 56: Gateway
Press “UP” or “DOWN” button on the front panel to move the cursor to the GATEWAY line at the NETWORK setup menu. Press “ENTER” button to display a keyboard box. Use the same way for setting IP address to set GATEWAY. -
Page 57: Email
button beside DDNS. It will apply for free DDNS automatically. After some time the DVR will get a user name and it can not be changed. You can open the IE browser and enter host name website: http://dy.vip620.com or enter http://dy.vip620.com/(your username) to access the DVR directly. -
Page 58: Bitrate
(1) Press “UP” or “DOWN” button on the front panel to move the cursor to the EMAIL line at the EMAIL setup menu. Press “LEFT”, “RIGHT” button to select ON or OFF. When selecting OFF, the EMAIL function is disabled. (2) When setting EMAIL to ON, press “UP”... -
Page 59: Backup Menu Setup
3.8 BACKUP Menu Setup Connect USB device to the USB port of DVR. Press “MENU” button on the front panel to display MAIN MENU during the live display mode. Press “UP”, ”DOWN”, “LEFT” and “RIGHT” buttons to select BACKUP button in the MAIN MENU and press “ENTER”... -
Page 60: Start
to the BACKUP setup menu. 4. START If the USB or SATA DVDRW device is connected to this DVR, press “LEFT” or “RIGHT” button on the front panel to move the cursor to the date or time of START line and press “UP” or “DOWN” button to select backup beginning date/time. -
Page 61: System Menu Setup
8. Press “ENTER” button on the front panel to display warning box. Press “ENTER” button on the front panel again to begin format USB device and then start backup. Press “CANCEL” button on the front panel to start backup without USB device format. When the backup is completed, it will return back the BACKUP setup menu. -
Page 62: Time Setup
1. TIME SETUP Press “UP” or “DOWN” button on the front panel to move the cursor to the TIME SETUP line and press “ENTER” button to display the TIME SET menu. Press “UP”, “DOWN”, “LEFT” or “RIGHT” button to set the current date/time and select display format of date/time at the TIME SET menu. -
Page 63: Account Manager
● Mouse Move the cursor to the TIME SET line at the SYSTEM setup menu. Click on the “SET” button to display the TIME SET menu. Move the cursor to the date/time of TIME line or FORMAT line. Turn the middle mouse button to set the current date/time and select display format of date/time at the TIME SET menu. - Page 64 (1) There are 3 factory setting users. The user name “admin” is an administrator user and the factory setting password is admin. The user name “user” is a default user, the factory setting password is user and its authority is that only view live video.
- Page 65 (3) If login user is admin, press “UP” or “DOWN” button on the front panel to move the cursor to ADD USER line at the ACCOUNT MANAGER menu. Press “ENTER” button to display ADD USER menu. Press “UP” or “DOWN” button to move the cursor to the USERNAME and the USER PASSWORD line and press “ENTER”...
-
Page 66: System Info
authority at the MODIFY USER menu. ● Mouse If login user is admin, move the cursor to any user line at the ACCOUNT MANAGER menu. Click on the “SET” button to display MODIFY USER menu. Move the cursor to the USER PASSWORD and click on the “SET” button to open keyboard box to modify the password. -
Page 67: Video Format
It will display the system information include system firmware version, HDD information. OVERWRITE Press “LEFT”, “RIGHT” button at the SYSTEM INFO menu to select overwrite function ON or OFF. Press “ENTER” button on the front panel to exit the SYSTEM INFO menu and return to the SYSTEM setup menu. -
Page 68: Firmware Upgrade
2. At the SELECT DISK setup menu, Press “LEFT” or “RIGHT” button on the front panel to select the HDD for formatting. When select ALL will format all HDD. 3. Press “ENTER” button on the front panel to begin HDD formatting. 8. -
Page 69: Factory Reset
(2) It will take some time to update firmware. After firmware updating completely, the DVR will be switched off and restarted again automatically. 9. FACTORY RESET Press “UP” or “DOWN” button on the front panel to move the cursor to the FACTORY RESET line and press “ENTER”... -
Page 70: Vga
(2) Press “UP” or “DOWN” button on the front panel to move cursor to the CHANNEL MODE line at the SPOT MONITOR setup menu. Then press “LEFT” or “RIGHT” button to select the display mode for spot monitor: HEXA, FULL, QUAD, NINE. Press “UP” or “DOWN” button on the front panel to move cursor to the ROTATION TIME line. -
Page 71: Ⅳ Factory Default
Ⅳ FACTORY DEFAULT The factory default setting for the DVR displayed as below: Factory Items Optional Setting Default SYSTEM User Name:1, Login Setting in menu No password SETUP Auto Sequence 1~10 second/OFF Motion Buzzer 5 seconds 1-60 second/OFF System Log ON/OFF General Sensor Buzzer... - Page 72 Motion Alarm 5 second 1~60 second/OFF Time Sensor Alarm 1~60 second/OFF Time...
-
Page 73: Ⅴ Network Viewer
Network Viewer Ⅴ 5.1 IE Browser Enter IE browser of your computer, input the IP address of the DVR or DDNS name of DVR include IE port number (no need to input the default IE port 80). If it is first time to use computer to connect with DVR, it will ask to download software plug-in and it will take several seconds to download. - Page 74 TYPE DESCRIPTION Double click the area to display the single channel image. Video display area Double click again to display last display mode. Audio volume Display and change PC audio volume. Select the playback mode. Select the local file play mode. PTZ control for pan and tilt.
- Page 75 Enable or disable the automatic connection. Minimum of the net viewer window. Maximum of the net viewer window. Setup the connection and start to connect to DVR. Setup of DVR parameter Status bar（Connection status and time display） 3. Click the button as below: Input IP address of DVR (it can be saved automatically) or free DDNS user name, port number (default is 2200), no need to input port number when using free DDNS user name,...
- Page 76 Select the tag and set the parameter of DVR. Click the Save button to change and save the new parameter to the DVR. If the internet speed is very low it may be fail to set the new parameter and it will popup the message box to display the warning of time out. 5.
- Page 77 TYPE DESCRIPTION Select the live mode. Select the local file play mode. Start the playback of DVR recording file. Stop the playback of DVR recording file. Fast Forward Playback. Rewind Playback. Select playback channel Start date of playback. Start time of playback. Click on the button to change NetViwer to local mode.
- Page 78 Ⅵ SPECIFICATION Compression Format H.264 Video System NTSC/PAL Video Input Composite 1.0Vp-p/75Ω，BNC×4/8/16/24/32 1.0Vp-p Composite 75Ω，BNC×1 monitor, BNC×1 spot Monitor Output monitor(16/24CH), BNC×2 spot monitor(32CH) VGA Output Analogue RGB 60 Hz，800x600, 1024x768, 1280x1024 Resolution NTSC(720x480) PAL(720×576) Audio Input -8db22kΩ,RCA connector×4/8/16 Audio Output -8db3kΩ,RCA connector×1 Alarm Input 4/8/16...