1. TIME SETUP
Press "UP" or "DOWN" button on the front panel to move the cursor to the
TIME SETUP line and press "ENTER" button to display the TIME SET menu.
Press "UP", "DOWN", "LEFT" or "RIGHT" button to set the current
date/time and select display format of date/time at the TIME SET menu. There
are 3 display formats for date/time: ASIA, EURO and US. Press "ENTER"
button to return to the SYSTEM setup menu.
Press "UP" or "DOWN" button to ZONE and press "LEFT" or "RIGHT"
button to select the local area zone. Press "UP" or "DOWN" button to
SERVER and press "MENU" button to set a IP address of time server or keep
the default server IP address. Press "UP" or "DOWN" button to NTP ON and
press "LEFT" or "RIGHT" button to set it to ON. Press "ENTER" button to
get correct date and time for DVR. When using NTP to set date and time, make
sure the DVR can be connected to internet.
The TIME SET menu displayed as below: