System Information - Inesun INS-24DVR02 User Manual

press "UP" or "DOWN" button to select backup beginning date/time and end
date/time.
4. Press "ENTER" button on the front panel to begin backup.
● Mouse
1. Click the mouse on the MENU icon on the bottom status bar to display POPUP
MENU during the live display mode. Then click on the "SETUP" button to
display MAIN MENU. Then click on the "BACKUP " button to enter BACKUP
setup menu.
2. At the BACKUP setup menu, move the cursor to the CHANNEL, START or
END line. Click on the "SET" button to select the backup channel, backup
beginning date/time and end date/time or turn the middle button of mouse to
select backup beginning date/time and end date/time.
3. Click on the top right "O" (OK) button to begin backup.

2.12 System Information

1. Press "MENU" button on the front panel to display MAIN MENU during the
live display mode.
2. In the MAIN MENU, Press "UP", "DOWN", "LEFT" and "RIGHT" buttons
to select "SYSTEM" button and press "ENTER" button to enter SYSTEM
setup menu.
3. Press "UP" or "DOWN" button on the front panel to move the cursor to the
SYSTEM INFO line. Press "ENTER" button on the front panel to enter
SYSTEM INFO menu.
4. Press "LEFT" and "RIGHT" buttons to enable or disable HDD overwrite
function. When setting HDD OVERWRITE to OFF, the system may stop
recording if the hard disk is full during recording. When setting OVERWRITE
to ON, the system may not stop recording and automatically overwrite the
oldest recorded file.
● Mouse
1. Click the mouse on the MENU icon on the bottom status bar to display POPUP