3.8 BACKUP Menu Setup
Connect USB device to the USB port of DVR. Press "MENU" button on the front
panel to display MAIN MENU during the live display mode. Press
"UP", "DOWN", "LEFT" and "RIGHT" buttons to select BACKUP button in the
MAIN MENU and press "ENTER" button to enter BACKUP setup menu. Press
"CANCEL" button to exit submenu without saving.
The BACKUP setup menu displayed as below:
1. DISK
If the USB or SATA DVDRW device is connected to this DVR, press "LEFT"
or "RIGHT" button on the front panel to move the cursor to the DISK line and
press "UP" or "DOWN" button to select HDD. When using only one HDD, it
can not be selected.
2. DEVICE
It will display USB if the USB device is connected to this DVR. It will display
CDROM if the SATA DVDRW ROM device connected to the DVR.
3. CHANNEL
If the USB or SATA DVDRW device is connected to this DVR, press "LEFT"
or "RIGHT" button on the front panel to move the cursor to the CHANNEL
line and press "MENU" button to display the CHANNEL ENABLE menu.
Press "LEFT" or "RIGHT" button to select the backup channel at the
CHANNEL ENABLE menu and press "UP", "DOWN" button to select ON or
OFF to enable or disable the backup channel. Press "ENTER" button to return