Sensor Channel; Sensor Type; Post Record Time; Buzzer Time - Inesun INS-24DVR02 User Manual

display mode. Press "UP", "DOWN", "LEFT" and "RIGHT" buttons to select
SENSOR button in the MAIN MENU and press "ENTER" button to enter
SENSOR setup menu. After setting, press "MENU" button to save the setting.
Then exit the submenu and main menu. Press "CANCEL" button to exit submenu
without saving.
The SENSOR setup menu displayed as below:

1. SENSOR CHANNEL

Press "UP" or "DOWN" button on the front panel to move the cursor to the
SENSOR CHANNEL line at the SENSOR setup menu. Press "LEFT",
"RIGHT" button to select the channel to set. Select "ALL" to set all channels.
When selecting "ALL", if one item display "---" it means that this feature item
of each channel is different. When saving the setting, if the item selected "---"
the setting of this item is not changed.

2. SENSOR TYPE

Press "UP" or "DOWN" button on the front panel to move the cursor to the
SENSOR TYPE line at the SENSOR setup menu. Press "LEFT", "RIGHT"
button to select the sensor type: NORMAL CLOSE or NORMAL OPEN.

3. POST RECORD TIME

(1) Press "UP" or "DOWN" button on the front panel to move the cursor to
the POST RECORD TIME line at the SENSOR setup menu. Press
"LEFT" or "RIGHT" button to select post-alarm recording time.
(2) The post-alarm recording time can be set from 10 second to 60. When
setting it to OFF, the post-alarm recording time is 0 second.

4. BUZZER TIME