Table of Contents
Advertisement
8. Press "ENTER" button on the front panel to display warning box. Press
"ENTER" button on the front panel again to begin format USB device and
then start backup. Press "CANCEL" button on the front panel to start backup
without USB device format.
When the backup is completed, it will return back the BACKUP setup menu.
● Mouse
(1)
At the BACKUP setup menu, if the USB or SATA DVDRW device is connected
to the DVR move the cursor to the CHANNEL, START or END line. Click on
the "SET" button to select the backup channel, backup beginning date/time
and end date/time or turn the middle button of mouse to select backup
beginning date/time and end date/time.
(2)
Click on the top right "O" (OK) button to begin backup.
If no any backup device connected to the DVR when beginning the backup, it will
display the information that no backup device found.
3.8 SYSTEM Menu Setup
Press "MENU" button on the front panel to display MAIN MENU during the live
display mode. Press "UP", "DOWN", "LEFT" and "RIGHT" buttons to select
SYSTEM button in the MAIN MENU and press "ENTER" button to enter
SYSTEM setup menu. After setting, press "MENU" button to save the setting.
Then exit the submenu and main menu. Press "CANCEL" button to exit submenu
without saving.
The SYSTEM setup menu displayed as below:
Hide quick links:
Advertisement
Table of Contents
