Power On; Power Off; Display Mode - Inesun INS-24DVR02 User Manual

: This icon on the bottom status bar is called the MENU icon in this manual.
: This button in the menu is called the SET button in this manual.
: This button in the menu is called the CANCEL button in this manual.
: This button in the menu is called the OK button in this manual.

2.1 Power On

1. After installation correctly, connect power adaptor to switch the power of DVR on.
2. The HDD must be formatted by DVR when using the HDD first time.

2.2 Power Off

1. Enter the popup menu and select QUIT to power off the DVR. During this time,
press ENTER button on the front panel to power on DVR again.
Note: If the DVR power off abnormally during recording, playback or system setup,
it will take longer time to power on.
2. If the DVR is not in use for a long time, please remove the connection of the power
cord of adaptor.

2.3 Display Mode

1. Press the "MODE" button or " "/"LEFT" and " "/"RIGHT" button to select
the different screen display (FULL CHANNEL, PIP, QUAD, 9 SPLIT, 16/25/36 SPLIT)
during the live display mode. Press NUMBER button or " "/"UP" and " "/"DOWN"
button to select single camera and the single live view is displaying on the screen.
● Mouse
Click the mouse on the MENU icon on the bottom status bar to display POPUP
MENU during the live display mode, click on the LIVE button and select the different screen
display mode.
In the live QUAD or SPLIT display mode, double click the image of a channel to
display the single channel. Double click the image again to display QUAD or SPLIT image.
2. Press the "AUTO" button on the front panel to start auto sequence display. Each
screen displaying will automatically switch according to the MAIN ROT TIME duration
setting in the setup menu.
3. To zoom in images can only be operated by mouse.
● Mouse
Select the desired single camera and the single live view is displaying on the
screen. Click the mouse on the MENU icon on the bottom status bar to display POPUP
MENU during the live display mode, click on the "Zoom" button to enable ZOOM function.
Keep pressing the left mouse button and drag it to select zoom area. After release the left
mouse button it will zoom in the selected image. Right click the mouse to return back the