Ptz Other Set Function - Inesun INS-24DVR02 User Manual

number you want to delete. Click on the CLR PAT button to delete
selected tour.
4. AUX
a. At the PTZ PRESET menu, move the cursor to the AUX frame. Turn the
middle button of mouse to set AUX number to 1 or other number you
want to operate.
b. At the PTZ PRESET menu, click on the AUX ON button to turn on this
aux operation. For aux operation, please refer to the user manual of PTZ.
c. At the PTZ PRESET menu, click on the AUX OFF button to turn off this
aux operation. For aux operation, please refer to the user manual of PTZ.

2.13.3 PTZ Other Set Function

1. In PTZ operation mode, press "LEFT", "RIGHT", "UP" or "DOWN" button on
the front panel to move the cursor to SET button at the menu, press "ENTER"
button on the front panel to display PTZ SET menu and enter PTZ other
function setting mode. If it does not support pattern and auto scan operation
for the PTZ protocol, this menu can not be opened.
2. PATTERN
a. At the PTZ SET menu, press "LEFT", "RIGHT", "UP" or "DOWN"
button on the front panel to move the cursor to the PATTERN frame.
Press "UP" or "DOWN" button on the front panel to set PATTERN
number to 1. Move the cursor to the BEGIN button and press "ENTER"
button on the front panel to start pattern setting.
b. Press "CANCEL" button on the front panel to exit PTZ other function
setting mode and return to PTZ operation mode. Press "UP", "DOWN",
"LEFT", "RIGHT" and "ENTER" buttons to control PTZ to any position.
When all operating route finished, enter PTZ SET menu again and move
the cursor to the END button and press "ENTER" button on the front
panel to save the operating route to pattern 1. Using the same way to save
other PTZ operating route to relevant pattern number.