(2) It will take some time to update firmware. After firmware updating completely,
the DVR will be switched off and restarted again automatically.
9. FACTORY RESET
Press "UP" or "DOWN" button on the front panel to move the cursor to the
FACTORY RESET line and press "ENTER" button to display the WARNING
box.
The WARNING box as below:
Press "ENTER" button on the front panel to load the factory default setting.
10. LANGUAGE
Press "UP" or "DOWN" button on the front panel to move the cursor to the
LANGUAGE line and press "LEFT", "RIGHT" button to select system
language. The DVR language can be selected as: ENGLISH, CHINESE,
RUSSION, FRENCH, ITALIAN, GERMAN, SPANISH, PORTUGUESE,
TURKISH, THAI, HEBREW, GREEK, VIETNAMESE.
11. SPOT MONITOR(For 16/24/32CH DVR)
(1) Press "UP" or "DOWN" button on the front panel to move the cursor to
the SPOT MONITOR line at the SYSTEM setup menu. Press "ENTER"
button to display the SPOT MONITOR setup menu.
The SPOT MONITOR setup menu displayed as below: