Preparing The Sliding Rail - HP 245161-B22 - 10642 42U Rack Shock Pallet Reference Manual

Installing Components

Preparing the Sliding Rail

Components mounted with this type of rail are designed for frequent accessibility
and/or maintenance.
1. Extend the component rail until the component rail release latch clicks (1).
2. Hold down the component rail release latch (2) and completely remove the
component rail from the sliding rail assembly.
NOTE: You will attach the component rail to the component before you insert the unit into
the rack.
Figure 4-6: Removing the component rail from the
sliding rail assembly
4-10
2
1
HP 10000 Series Rack Reference Guide