Troubleshooting Table - Fujitsu ETERNUS LT20 S2 Installing, Starting Up And Maintaining

Troubleshooting Table

5.2 Troubleshooting Table
Problem
Power
Library does not power on Ê Check all power cord connections.
No display messages
appear
Tape movement
82
Solution
Ê Make sure the power switch on the front panel
is in the ON position.
Ê Make sure there is power to the outlet.
Ê Try another working outlet.
Ê Replace the power cord.
Ê Contact your service representative.
Ê Make sure the power cord is connected.
Ê Make sure the power switch is on.
Ê Power cycle the library.
Ê Download library firmware.
Ê Contact your service representative.
Troubleshooting
ETERNUS LT20 S2