Warnings; Precautions; Product Warranty Caution - Fujitsu ETERNUS LT20 S2 Installing, Starting Up And Maintaining

Warnings

ACHTUNG
Die Entladung von statischer Elektrizität kann hierfür empfindliche
Geräte oder Schaltkreise zerstören. Geeignete Verpackungsmaterialien
und Erdungstechniken sind Voraussetzungen um Schäden zu verhin-
dern.
1.3 Warnings
Ventilation – The product should be situated so that its location or position
●
does not interfere with proper ventilation.
● Heat – The product should be situated away from heat sources such as
radiators, heat registers, furnaces, or other heat producing appliances.
Power sources – The product should be connected to a power source only
●
of the type directed in the operating instructions or as marked on the
product.
● Power cord protection – The AC line cord should be routed so that it is not
likely to be walked on or pinched by items placed upon or against it, paying
particular attention to the cord at the wall receptacle, and the point where the
cord exits from the product.
Object and liquid entry – Care should be taken to insure that objects do not
●
fall and liquids are not spilled into the product's enclosure through openings.
1.4

Precautions

Do not expose the unit to moisture. The operating temperature for this unit
●
is between 10°C (50°F) and 35°C (95°F).
● Use the unit on a firm level surface free from vibration.
● Do not place anything on top of the unit.
1.5

Product Warranty Caution

The warranty for the tape library shall not apply to failures of any unit when:
8
Preface
ETERNUS LT20 S2