Rack Stability - Fujitsu ETERNUS LT20 S2 Installing, Starting Up And Maintaining

Preface
● The tape library is physically abused or used in a manner that is inconsistent
with the operating instructions or product specification defined by the
manufacturer.
The tape library fails because of accident, misuse, abuse, neglect, mishan-
●
dling, misapplication, alteration, faulty installation, modification, or service by
anyone other than the factory service center or its approved agent.
The tape library is repaired by anyone, including an approved agent, in a
●
manner that is contrary to the maintenance or installation instructions
supplied by the manufacturer.
● The manufacturer's serial number tag is removed.
The tape library is damaged because of improper packaging on return.
●
Unauthorized modifications to the unit configuration by the customer may result
in loss of guarantee by the vendor.
1.6

Rack Stability

V
WARNING
To reduce the risk of personal injury or damage to equipment:
Extend levelling jacks to the floor.
●
● Ensure that the full weight of the rack rests on the levelling jacks.
● Install stabilizing feet on the rack.
● In multiple-rack installations, secure racks together.
● Extend only one rack component at a time. Racks may become
unstable if more than one component is extended.
ETERNUS LT20 S2
Rack Stability
9