Fujitsu ETERNUS LT20 S2 Installing, Starting Up And Maintaining page 28

Rack Mounting the Tape Library
Figure 16: Mounted left sliding rail (rear side)
V
CAUTION
The library weighs 14 kg (without media). Most of the weight is toward
the back of the library.
8. Put the ETERNUS LT20 from the front of the rack on the support angles of
the sliding rails and push it into the rack to the back stop.
9. Remove the flange cover on the left hand side.
Figure 17: Remove flange cover
28
Installing the Tape Library
ETERNUS LT20 S2