Changing The Network Configuration - Fujitsu ETERNUS LT20 S2 Installing, Starting Up And Maintaining

Remote Management Unit (RMU) Operating the LTO Library
4.4.6.3

Changing the Network Configuration

This page shows the current network configuration of the library and allows
modification to the configuration. When a change is requested, a pop-up box will
ask to confirm the changes. You can reach this page by selecting Configuration
→ Network.
A list of changes that can be made are:
– Host Name
– Domain Name
– IPv4 DHCP Address (check On or unchecked)
– IPv4 Static Address
– IPv4 Subnet Mask
– IPv4 Gateway Address
– IPv4/IPv6 DNS Server 1/2
– IPv6 Stateless Auto Config
– IPv6 DHCPv6 Addressing
– IPv6 Static Addressing
– IPv6 Static Address
– Enable SSL for Web
Figure 42: Configuration, Network page
60
ETERNUS LT20 S2