Rear Panel - Fujitsu ETERNUS LT20 S2 Installing, Starting Up And Maintaining

Rear Panel

No. Description
7 Control key "UP" button [▲]
The UP button is used to navigate through menu items.
8 Control key "CANCEL" button.
The CANCEL button is used to cancel a user action and return to the
last menu item.
9 Right magazine.
10 Air vents.
11 Control key "ENTER" button.
The ENTER button is used to go to a sub menu or execute an action.
12 Control key "DOWN" button [▼]
The DOWN button is used to navigate through menu items.
13 Front panel "OCP" display, consisting of 2x16 characters.
The OCP screen displays actions and status information, menu items
or error messages equivalent to the operation mode.
2.2 Rear Panel
The rear of the tape library provides access to signal connectors, tape drive bay,
the power connector, Ethernet, serial and the USB port. Figure
rear panel of a library with a half height LTO drive each.
Figure 3: Rear panel with a SAS tape drive
Figure 4: Rear panel with a Fibre Channel tape drive
14
Product Description
3 to 4 show the
ETERNUS LT20 S2