Changing The Snmp Configuration - Fujitsu ETERNUS LT20 S2 Installing, Starting Up And Maintaining

Remote Management Unit (RMU) Operating the LTO Library
After certificate installation a parameter must be modified in Internet Explorer to
prevent the request for the certificate always appearing:
In Internet Options → Extended, uncheck the box for showing warnings if the
certificate address does not match and click OK.
Figure 50: Unchecking the warnings box
4.4.6.4

Changing the SNMP Configuration

This page shows the current SNMP configuration of the library and allows
modification to the configuration. When a change is requested, a pop-up box will
ask to confirm the changes. You can reach this page by selecting Configuration
→ SNMP.
A list of changes that can be made are:
– SNMP Enabled
– IPv4 / IPv6 SNMP Target Addresses
– IPv4 / IPv6 Target 1
66
ETERNUS LT20 S2