Report Programming: Program Addresses; Program Addresses (3207-3419) - Bosch DS7400Xi Reference Manual

10.27 Report Programming: Program Addresses (3207-3419)

• To send the User number along with open, close, or partial close reports: place an 'F' (*5) in the extended digit.
• To disable a report (meaning that nothing will be sent), place a '0' in the reporting digit.
• When using SIA or Contact ID format, place a '1' in the reporting digit of each report you wish to enable. It is not necessary to program
the extended digit.
• For suggested values for 4/2, BFSK and Pager format, see section 12.1-12.3. For SIA and Contact ID, the values sent are listed in
sections 13.1 and 13.2. For other formats, consult your central station.
• HEX values: Some Data Digit values are higher than 9. These values are programmed by pressing the [*] key followed by another
number. These values will display as HEX characters when entered. The HEX character values are as follows:
See Glossary (section 6.13) for further details.
DS7400Xi ( 4+) Reference Guide
*0 = A *1 = B *2 = C *3 = D
Copyright © 2007 Bosch Security Systems, Inc.
*4 = E *5 = F
P/N: F01U035325-01 Page 53