The List Of The Hold Function - AND AD-4430B Instruction Manual

Function No.
Function
Parameter
name
and range
Mass to be
Fnc09 compared
with
1 to 2
near-zero
Fnc10
Set value of
-99999 to
upper limit
99999
Fnc11
Set value of
-99999 to
lower limit
99999
Mass to be
compared
Fnc12
with upper
1 to 2
and lower
limit
Output logic
Fnc13 of upper
1 to 2 and lower
limit
7.6.2.

The List Of The Hold Function

Function No.
Function
Parameter
name
and range
HLd01 Averaging
0.00 to 9.99 time
HLd02 Start wait
0.00 to 9.99 time
Condition of
HLd03
automatic
0 to 2
start
Release
HLd04 due to
falling
0 to 1
control input
HLd05 Time
0.00 to 9.99 release
Release
HLd06 due to
0 to 99999 range of
fluctuation
Release in
HLd07
near-zero
0 to 1
range
Description
Item to be compared with near-zero.
1 : Gross weight
2 : Net weight
Reference value for the upper limit.
Decimal point position is linked to CAL02.
Reference value for the lower limit.
Decimal point position is linked to CAL02.
Item to be compared with the upper and lower limit.
1 : Gross weight
2 : Net weight
Logic used when the result of the comparison with
the upper and lower limit is output
1 : Positive logic
2 : Negative logic
Description
Time to perform the averaging. Unit : second.
0.00 is not averaged.
Time to wait before commencing hold or averaging.
Unit : second.
Condition to start the hold or averaging automatically.
0 : Do not use automatic start.
1 : Above the near-zero range, and stable.
2 : Above the near-zero range.
Release when control input is falling.
0 : Do not release
1 : Release
Release after a set amount of time has passed.
Unit : second. 0.00 is not averaged.
Release when fluctuation from the holding value
exceeds a set value. The decimal point position is
the same as the setting of CAL02.
Release when the weighing value is in the
near-zero range.
0 : Do not release.
1 : Release.
- 44 -
Default User
MEMO
value setting
1
10
-10
1
1
Default User
MEMO
value setting
0.00
0.00
0
1
0.00
0
0
AD-4430B