5.2.2.
Operation Switches
Key
Weighing mode
Weighing mode
Setting mode
Weighing mode
Setting mode
Weighing mode
OFF mode (Standby) When turning on the module, press the key.
Setting mode
Weighing mode
Setting mode
Weighing mode
+
Function mode
+
OFF mode (Standby) The keys to proceed to the calibration mode.
+
State
The display switch between gross and net in factory setting.
The zero key to perform the zero adjustment.
The key to change a selected item or move a flashed figure.
The tare key.
The key to select parameter or increase number.
When turning off the module, press and hold the key.
The key to store new settings.
Function key can be selected the function and use.
The return key or escape key.
The keys to proceed to the function mode.
The keys to proceed to the check mode.
Function and Use
- 18 -
AD-4430B