Table of Contents
Advertisement
Clearing The Tare Weight And Zero Adjustment
The way to clear the tare weight and zero adjustment : While pressing and holding the
key, turn on the module. Another way : In turning off the module, while pressing
(TARE)
and holding the
5.1.4.
Customizing The Function Of the Switch F
Assign a function to the
Functions Related To The
Assigns a function to the
0: None
1: Manual print command
2: Hold
3: Alternate switch
4: Momentary switch
5: Display selection
6: Clear the tare weight
7: Clear the zero value
CAL15( Clear the zero value ) : The selection to enable or disable clearing the zero value.
CAL20( Output when the gross weight is negative ) : The selection to enable or disable the
print command when the gross weight is negative.
Alternate switch and momentary switch
By assigning these switches to the
transmitted to the master station. This is useful when building a network or performing
maintenance. The function of the display x can be specified by the
monitored. These switches work as follows :
Alternate switch
When pressing and releasing the switch once, the state of the switch is maintained.
Press the switch again to turn off or on.
Momentary switch
Only while the switch is being pressed, the switch is ON. When it is released, it is OFF.
key, press the
(TARE)
key in the general functions.
Key
key from the functions of Fnc02(
key.
key, the ON/OFF status of the
- 14 -
key ) below :
key can be
key and can be
AD-4430B
Advertisement
Table of Contents
