Table of Contents
Advertisement
5.3.6.
The Function
Step 1
Press the
Press the
Select
Step 2
Select
Step 3
Select a desired function number using the
The current data is displayed.
Step 4
When changing data, two methods of parameter selection and digital input depending on
the function are available.
Type
Parameter selection
Digital input
After changing data, press the
When the value is not to be changed, press the
number display.
Step 5
Press the
Press again the
The blinking decimal point means that the current value is not the weight value.
If a data exceeding the available range is inputted,
canceled.
+
key to enter to the calibration mode and display
key to start the calibration and display
using the
key and press the
using the
key and press the
Only the available parameter is displayed and blinks.
Select a number using the
All the digits are displayed and a digit to be changed blinks.
Select a digit using the
change the value using the
key to store new data in FRAM and
key to return to the weighing mode.
Related To The Calibration
key and press the
Description of method to change data
key.
key and
key.
key. The next function number is displayed.
key to return to the function
- 24 -
.
key.
key.
key.
is displayed.
is displayed and data is
AD-4430B
.
Advertisement
Table of Contents
