Table of Contents
Advertisement
Function No.
Parameter
Function name
and range
CAL02
Decimal point
0 to 0.0000
CAL03
Minimum division
1 to 50
CAL04
Weighing capacity
1 to 99999
CAL05
Zero adjustment
0 to 100
CAL06
Zero tracking time
0.0 to 5.0
CAL07
Zero tracking band
0.0 to 9.9
Displayed value
4.5 d
0 d
Displayed value
5.0 d
4.5 d
4.0 d
3.5 d
3.0 d
2.5 d
2.0 d
1.5 d
1.0 d
0.5 d
0.0 d
AD-4430B
Decimal point position of the weight value
position
Minimum division (d) of the weight value
Weighing capacity of the module.
Weighing is possible up to the value of this setting plus
8 d. If the value exceeds this, overflow will occur and
will not be displayed. The decimal point position is the
same as the setting of CAL02.
Range to enable zero adjustment by the
key Expressed as a percentage of the weighing
capacity with the calibration zero point as the center.
For example, if this is set to 2, the value in the range of
±2% of the weighing capacity with the calibration zero
range
point at the center will be to zero. When a power-ON
zero is performed, the initial zero point will be the
center.
Performs zero tracking using this setting in
combination with the setting of the zero tracking band
CAL07. When 0.0, zero tracking will not be performed.
Unit : Second in 0.1 increments.
Performs zero tracking using this setting in
combination with the setting of the zero tracking time
CAL06. When 0.0, zero tracking will not be performed.
Unit : d (minimum division) in 0.1 increments.
When CAL06 = 1.0, CAL07 = 4.5
1 second
1 second
Description
0
0.000
0.0
0.0000
0.00
1
10
2
20
5
50
Zero tracking follows the weight
value drifting a round the zero point
and adjusts to display as zero.
When
Zero tracking functions when the
CAL06 = 1.0,
weight value is drifting the range
CAL07 = 4.5
shown in the graph.
When
CAL06 = 2.0,
CAL07 = 0.5
2 second
- 25 -
Default
value
0
1
70000
(ZERO)
2
0.0
0.0
Advertisement
Table of Contents
