Using Page Setup With The I800 Series Scanners - Kodak 8342693 - Capture Software - PC User Manual

Using Page Setup
with the
i800 Series Scanners
A-63054 February 2004
To set Page Setup options for the i800 Series Scanners:
1. Select Page>Setup.
The Page Setup dialog box appears with the page properties of the page
setup name selected from the main Capture Software window.
2. Enter a new page name or select a page name from the Page name
drop-down list.
3. Select the Bi-tonal resolution and/or Color resolution from the
drop-down list(s).
The following table provides the valid resolution values for bitonal and
color scanning, as well as the valid combination of resolutions when
dual-stream scanning.
Bitonal Resolution (dpi)
200
300, 240
400
NOTES: For the i810 Scanner and i830 Scanner, which are bitonal only
scanners, the color image resolution setting is not available.
For the i820 Scanner, the Color resolution value of 300 dpi is
not available.
When color-only scanning with an i820 Scanner or i840 Scanner,
the Bi-tonal resolution setting is not available (i.e., is grayed out)
in the Page Setup dialog.
Color Resolution (dpi)
200, 150, 100
300, 200, 150, 100
300, 200
9A-11