Table of Contents
Advertisement
Mask tab
9A-26
Mask coordinates define the area to be scanned. Values are expressed in
hundredths of an inch. By default, all predefined image setups contain the
maximum scan mask for the attached scanner. The maximum scan mask is
ideal for Capture Software's auto-crop function.
To define a maximum scan mask:
1. Type 0 in Left field.
For both the front and rear images for the Scanner 2500, the
recommended value is 24.
For the rear image setup for the Scanner 1500 (rotary scanner only), the
recommended value is 16.
2. Type 0 in Top field.
3. Specify the scanner's maximum width in the Width field.
Scanner 1500 and Scanner 2500 Width value: up to 11.7 in. (coordinate
value: 1168).
For all other Kodak scanners, the maximum width value is 12 in.
(coordinate value: 1200).
NOTE: The Left and Width fields cannot exceed the scanner's
maximum width.
4. Specify the scanner's maximum height in the Height field.
Scanner 1500 and Scanner 2500 Height value: up to 17 in. (coordinate
value: 1700).
Scanner 3500, Scanner 3510, and Color Scanner 3590C Height value: up
to 26 in. (coordinate value: 2600).
Scanner 5500 and Scanner 7500 Height value: up to 20 in. (coordinate
value: 2000).
Scanner 5500 and Scanner 7500 Height value with the Document Image
Manager: up to 30 in. (coordinate value: 3000).
Scanner 9500 Height value: up to 30 in. (coordinate value: 3000).
NOTE: When scanning in duplex mode on a Scanner 1500 and Scanner 2500,
the Width and Height mask coordinates for the front and rear Image
Setup must be the same.
A-63054 February 2004
Advertisement
Table of Contents
