Table of Contents
Advertisement
Tool bar
A-63054 February 2004
If the Tool bar is not displayed, it can be displayed by choosing Options>Tool
bar. The following table describes the function of each button on the Tool bar.
Procedures on how to use these functions are also included in this section.
Most of these options can also be accessed from the Tools menu.
The following list provides all of the Tool bar options and a brief summary of
their functions.
Button
Re-Append images—allows you to re-append the remaining
images of a document after an Insert operation.
NOTE: The Re-Append images tool is not available for Capture
Software Lite for i50/i60/i80 Scanners.
Insert image—allows you to insert additional images into a
scanned document.
NOTE: This option is not available for Capture Software Lite for
i50/i60/i80 Scanners.
Rescan—allows you to rescan images in a document.
NOTE: This option is not available for Capture Software Lite for
i50/i60/i80 Scanners.
Delete image—click this button if you want to delete one or
more images.
Delete end of document—click this button to delete the selected
image and all subsequent images of a document. This action
cannot be undone.
Confirmation—allows you to confirm an unchangeable action
(no undo). Confirmation is required for the Delete, Blank, Crop,
and Copy Area tools.
Flag image—use this tool to indicate something special has to be
done with an image after batch processing. Not yet available.
Rotate 90°—rotates the selected image 90 degrees to the right.
Rotate 180°—rotates the selected image 180 degrees.
Rotate 270°—rotates the selected image 270 degrees to the right
(i.e., 90 degrees to the left).
Description
3B-31
Advertisement
Table of Contents
