Table of Contents
Advertisement
Displaying bar code
values
6-20
Bar code/OCR values can be displayed by selecting the Test All Bar Code
and OCR Zones button
button
on the Button bar. When you select this option, Capture Software
attempts to read all bar code/OCR zones defined for a bar code/OCR value. If
any bar codes/OCR text are found, the Bar Code Value window appears.
The Bar Code Value window shows the following information about each
bar code:
• Label of the bar code zone.
• Type of bar code found in the zone.
If the zone is an OCR zone, Type will be OCR.
• Confidence level (in a percentage) of the bar code value found.
• Orientation of the bar code (with 0 degrees representing a horizontal and
right-side up bar code).
• Value of the bar code/OCR text.
• X and Y coordinates of the upper left corner of the bar code/OCR zone.
The coordinates are in 1/100 of an inch and represent the distance of the
zone from the upper left corner of the image.
• Width and Height of the bar code/OCR zone in units of 1/100 of an inch.
NOTE: If a bar code/OCR value cannot be found for a zone, the zone
is still included in the value list with only the Label and zone
coordinates displayed.
or the Test Selected Bar Code and OCR Zones
A-63054 February 2004
Advertisement
Table of Contents
